Thermowells are tubular fittings used for mounting temperature sensors (thermocouples, RTDs, thermistors) into pipelines, tanks and other facilities.
They are made of two types: welded and carved maximum up to 50 MPa of pressure, steam flow rate up to 40 m/s and water flow rate up to 4 m/s.
Materials: 321S, 403S, 15CrMoV5-10. When mounting a probe through a thermowell, it is preferably to fill the thermowell with oil and copper flakes or heat-conducting paste.
Supplied with temperature probes or as a standalone product.
Note: To go to a definite thermowell model, move the cursor on the image and click on it.
Thermowell Specifications Model
* Ru - maximum overpressure at ambient temperature = 293К (20 °С)
Lugs are used for mounting temperature probes into pipelines, tanks and other facilities. Supplied with temperature probes or as a standalone product.
Lugs Bk-1 and Bk-2 are designed for mounting temperature probes or thermowells in places where they can not be directly mounted. Lugs Bk-1 and Bk-2 are made by welding to the surface. BK-3 lug is mounted to the surface with the thread and is suitable for probes with bayonet nut (models 3-13 and 3-14).
Materials: 321S, 403, A570(36),1020.
Mounting screws are designed for temperature probes without thread fitting. Mounting screws can change the immersion length of temperature probe. Shp-19 Model is applied in temperature range up to 150 °С (used rubber gasket), Shp-20 Model - from 150 °С (used metal cone insert). Supplied with temperature probes or as a standalone product.
Materials: AISI 321, 403.